Wax Melters (Gas) (Various Sizes)

WAX MELTER, STAINLESS STEEL, WITH BURNER

This device is intended for recovery wax of the frames of bee and drought using the steam bath. It consists of an external tank, internal stand and basket for frames. Additional accessories included are a gas burner stand, a water seal around the lid to prevent heat loss.

WARNING !

Gas cylinder connected to the burner via a pressure regulator for gas! Gas connections and tank not included.

How to operate

1. Pour the tank with water to the level of the drain pipe.

2. Fill the basket of frames or drought.

3. The device replace the lid.

4. Burner placed under the device so that the flame heat up the entire bottom surface of the device.

5. Wait until the formation of steam and sail melted wax.

6. After melting the batch check the water level and the possible lack of make up.

7. Refill basket of frames or drought.

8. Steps 6 and 7 are repeated until the end of melting.

9. After the process is complete turn off the burner and gas cylinder.

10. Clean the basket and prepare it for the next use.