Silicone mold – BEES WAX bar 0.5 kg

Silicone molds are made of flexible and durable silicone with plastic properties enabling repeated use.

Mold dimensions:

Height [cm]: 7
Length [cm]: 18.5

Width [cm]: 10.5
Weight [kg]: 0.76

Candle dimensions:

Height [cm]: 5
Length [cm]: 16

Width [cm]: 8.1
Wax weight [g]: 500
Wick: not applicable

The molds are made of flexible and durable silicone with plastic properties that allow for repeated use.

Before filling the mold with liquid wax, it is recommended to spray it silicone spray. Silicone is both a preservative for the mold and a factor that makes it easier to remove the finished candles. The variety of mold designs offered will ensure that you can prepare a candle for any occasion.

The prepared beeswax block can be lightly sprayed with silicone spray, which will make it shine.
When preparing candles, you can "ennoble" the block a bit by adding scented oils intended for candles to the still liquid wax.

How to make a beeswax block?

You will need:
» silicone mold,
» filtered beeswax
» silicone spray (optional) - the mold can be sprayed with silicone spray inside - if available it's a more difficult pattern, it will be easier to take it out.

1. Preparation of the mold

If we are casting candles with a complex pattern, they should be sprayed with silicone spray from the inside. Then it will be easier to remove the finished candle from the mold. 

2. Flooding the mold with wax

Melt the wax in a pot (preferably enameled or stainless). Before pouring, the wax should be at the appropriate temperature - approximately 60°C. It should not be too cold or too hot. Pour the wax in a slow stream so that it reaches all the recesses. The hardening time of the wax depends on the size of the silicone mold.

3. Removing the block from the mold

When the wax hardens and is cold, turn the mould upside down and gently release by putting outward pressure on the sides of the silicone mould.

Mold use recommendations:

When making castings from molds, you must take precautions, bearing in mind that you are working with a hot substance.

The manufacturer is not responsible for situations resulting from improper use.

MULTIFUNCTIONALITY OF FORM

Silicone molds can be used for various raw materials:

• beeswax
• soy wax
• palm wax
• paraffin
• ceramic plaster
• creative concrete
• epoxy resin
•  soap base

In the large offer of Lyson Company you can find silicone moulds that allow you to make candles from beeswax.

Silicone moulds are made of flexible and durable silicone with plastic properties that enable their repeated use. Before the mould is filled with liquid wax, it is recommended to spray it with silicone spray. Silicone is also a preservative for the mould and a factor facilitating the removal of ready-made candles.

The variety of offered forms will give you the opportunity to make candles for every occasion.

Ready candles from beeswax can be freely decorated with quite popular decoupage technique or natural products, such as coffee beans, etc. Ready-made candle can be sprayed gently with silicone spray which will give it a shine. You can also add scented oils or colours to liquid wax for effects required. Candles make unique decoration as well as an original gift for family and friends.